DẦU TÁCH KHUÔN ĐÚC NHÔM

DIELUBE-990V

Water Soluble lubricant for aluminum die-casting
DIELUBE-990Vhas a highly refined antiseizing and mw lubricants and
release components. It assures excellent casting release and lubrication of
slides, cores,eject pins.
2. Excellent casting surface.
Typical properties Items Results Test method
Appearance, conc
1. Excellent casting release.
The information contained and the recommendations made in this data sheet are based upon data collected and believed by us to be correct.
However, no guarantee or warranty of any kind, expressed or implied, is made herein with respect to the merchandise described and we assume
no responsibility for the results or the use there of.
DIELUBE-990V 1/1
12 months from the date of manufacture at sealed state, 0 to 40℃.
Refer to the our MSDS for safety information
1.attention subject (when use)
Completely remove existing fluids,chips from system.
Keep drum sealed.
Do not allow acid materials.
3. No build up or clogging of spray heads.
4. Suitable range is low to high temperature.
-Specific gravity, 15/4℃ 0.9870  ASTM D1122
White emulsion
None ASTM D92
KS M 0011
2. Rations as high as 50 to 100 are common.
* Above test results are new fluid’s typical properties, can be changed by quality improvement.
1. Start with a 70:1 dilution, extend as release permits.
3. Case,Comp,Valve,Head casting operation of low to medium
Storage drums laid and avoid contacting with land.